Do you know how to set up inflatable water trampoline?

Inflatable water trampoline is the one of popular element for water park.Our commercial grade Inflatable Water Trampolines are made of 0.9mm PVC tarpaulin, the diameters are from 3-6m(10ft-19.7ft) at your options..With Stainless steel on it, for the safety problem, we will add the mat on the steel to avoid hurt. It can connect with slide, bridge or other elements .Your best unique choice for aqua park.

Today, I would like to share some points how to set up the trampoline as following:
1. Find a flat location with plenty of room to walk around the trampoline frame. Lay out the frame pipes in a circle. Slide the ends of the pipes into each other then insert and screw together each section us-ing the enclosed bolts. When finished you will have a flat round frame.
Next, lay the jump mat in the center of the trampoline’s frame. Take 4 springs and attach one at 12:00, 3:00, 6:00 and 9:00. When installing the springs the hooks should be pointing towards the ground. Pulling the springs will require some physical strength. Complete the spring installation by filling in the rest of the springs until all slots are filled.
On 15’ & 20’ trampolines you may need three people to complete this part. Each person will space themselves equally around the trampoline frame. Lift the trampoline frame and set it on top of the flotation tube. Once the trampoline is in position, strap the frame of the trampoline frame to the flotation tube. Be sure the straps are securely fastened to the hardware. Check the frame straps after each use to assure the proper position on the tube.

The final step is to install the spring pad. Tie the spring pad around the trampoline frame. Use a double knot to prevent the spring pad from coming loose.